Volumes and measurements in Cabri 3D

LEGAL INFORMATION

The company CABRILOG SAS (referred to hereinafter as “CABRILOG SAS”) conducts business activities involving the design, development, publishing, distribution and maintenance of “dynamic geometry” software based on Cabri technology, intended for teaching and training.

CABRILOG SAS is owner of the Internet site www.cabri.com, referred to hereinafter as “Site”.
The purpose of Site is to present user the products and services marketed by CABRILOG SAS and to offer on-line sales of such products and services.Access and use of Site are subject to the terms and conditions appearing hereinafter and to the laws currently in force. In accessing Site, the user accepts said terms and conditions without limitation or reservation.

Identification of the company CABRILOG SAS

Registered office: Allée du Château, Cumane, 38160 Saint Sauveur, France
Legal status: Société par Actions Simplifiées (Limited Company) with capital of €84,320, appearing in the Companies Register (RCS) of Grenoble, France, as company number SIREN 429695513.
Mailing address: 122 avenue du Vercors, 38600 Fontaine, France
Tel.: +33 476-43-9700 / Fax: +33 476-86-1790
E-mail addresses: info@cabri.com / Technical services: support@cabri.com / Sales: sales@cabri.com
Intra-EC VAT no.: FR07429695513

Limits of Liability

CABRILOG SAS give no guarantee with respect to the availability or accessibility of Site or to the absence of viruses.
CABRILOG SAS may not be held liable for any damage that may occur as a result of fraudulent intrusion by a third party causing information appearing on Site to be modified.
Site is made available on an “as-is” basis without any further guarantee. Accordingly, CABRILOG SAS give no guarantee as to the commercial value of Site, the satisfaction of the user or the ability of Site to meet specific user requirements. CABRILOG SAS may not be held liable for any temporary or permanent damage sustained by user’s computer system or for any loss or damage (including but not limited to loss of data or profits) that may occur subsequent to access or navigation on Site or to utilisation of information contained on Site.
Information regarding prices and the availability of products and services appearing on Site is provided for reference only and is subject to change.

Links to other Web sites

Site displays links to third-party Web sites. CABRILOG SAS has no control over such sites or over their activities and declines all liability regarding their content.

Freedom of information

Site may be freely consulted without prior identification. CABRILOG SAS collects no personal data except for contact details in the event that general, sales or technical information is requested. Pursuant to French Freedom of Information Act 78-17 of 6 January 1978, Site users have the right to access, rectify and remove information concerning them. To exercise said right or to oppose data being disclosed to a third party, Site users may write to CABRILOG SAS (via post, fax or email)

Court Jurisdiction and Applicable Law

The terms and conditions applicable to use of Site are subject to French law.
Any dispute in connection with the CABRILOG SAS Internet Site, including those involving third-party proceedings or multiple respondents, shall be referred to the sole jurisdiction of the Commercial Court of Grenoble (38, France).

Intellectual Property

The components and structure of Site are protected under design and model rights, copyright and trademark rights. Accordingly, it is strictly prohibited, except with prior written authorisation from CABRILOG SAS:

1) to download or modify all or part of Site;
2) to use Site or the contents thereof (referenced products, descriptions, prices, download or copy of data on behalf of another retailer, use of data, software, sound clips, graphics, images, texts, photographs, tools) for sale, commercial or non-commercial purposes or otherwise;
3) to reproduce, copy, sell or utilise all or part of Site for commercial purposes;
4) to utilise techniques enabling the copying of a trademark, logo or any other information (specifically images, texts, layouts);
5) to use meta tags or any other “hidden” text containing Seller’s name, trademark or logo.

CABRI GEOMETRE, CABRI, CABRILOG are registered trademarks of CABRILOG SAS. The use of said marks by third parties without prior written authorisation from CABRILOG SAS is strictly prohibited. Product names, services and companies appearing on Site may be registered trademarks of third parties and are protected as such under intellectual property law.

Any rights that have not been expressly granted are reserved by CABRILOG SAS.

Copyright 2007 CABRILOG SAS

GENERAL TERMS OF SALE

Preamble

CABRILOG SAS is engaged in the design, development, editing, distribution and maintenance of « dynamic geometry » software, based on Cabri technology and designed for teaching and training purposes.
CABRILOG SAS sells the user licences for its software, via Internet, facsimile, post or electronic mail.
These General Terms of Sale are applicable to sales made via CABRILOG SAS’s Internet site.

Definitions

Company: the company CABRILOG SAS
Internet Site: the Company’s Internet site www.cabri.com.
Client: Any natural persons or legal entities who order one or more of the Company’s Products whether or not in connection with their professional activity.
Product / Products: the user licence or licences offered for sale on the Company’s Internet Site.
General Terms: all the provisions comprising these general terms of sale which apply to any order placed with the Company.
Box Format: Product supplied in a box containing one (1) CD-ROM with all the files for the software for which the user licence is sold.
Electronic Format: Product supplied in the form of a file that can be downloaded from the Internet Site.

Opposability of the General Terms

The fact of placing an order implies the Client’s full and unconditional acceptance of these General Terms. Any conflicting condition laid down by the Client, unless expressly accepted, shall not be opposable to the Company regardless of the time at which the Company may have been informed of such condition. The fact that the Company does not at any given time enforce any one of these General Terms shall not be construed as waiving the right to subsequently enforce any one of the said terms. The Company reserves the right to adapt or modify the General Terms. In the event of modification, the General Terms applied to any order shall be the General Terms in force on the day on which the order is placed.

Legal capacity

The Client declares that it possesses the capacity to enter into the present contract, the General Terms of which are presented hereafter, that is to say, for natural persons, that he/she is of legal age and not under guardianship or trusteeship.

Choice of the Products

The Client declares that it possesses the capacity to enter into the present contract, the General Terms of which are presented hereafter, that is to say, for natural persons, that he/she is of legal age and not under guardianship or trusteeship. Choice of the Products The Client is alone responsible for the choice of the Product and its appropriateness for the Client’s needs. The Company assumes no responsibility in this respect. It is incumbent upon the Client to ask the Company for any additional information and details concerning the characteristics of the Product or its use. After the Client has obtained information on the Products marketed by the Company and verified that they are compatible with the Client’s other equipment (hardware, software, configurations, etc.) and with the needs that it has determined, the Client records its order under its own responsibility. The Company shall not under any circumstances be held responsible for any direct or indirect damage, of any nature whatsoever, related to the use of or impossibility to use the Product sold. The Client can choose to order the Product in Box Format and/or in Electronic Format.

Order – Formation of the contract

At the time of the recording of the order placed on the Internet Site, a page entitled «Confirmation » is displayed enabling the Client to verify/change the details of its order and verify the total price. The Client confirms the order by clicking the « Confirm the order » button at the bottom of the page. This gives access to the Internet Site page where the order can be definitively confirmed through payment. After payment, the Client receives confirmation of the recording of its order from the Company (by e‑mail). We advise the Client to keep a copy of this e‑mail as proof of its order.

Price, payment and invoicing

The prices are quoted and invoiced as follows:
– prices of the Products in euros excluding VAT
– carriage charges excluding VAT
– VAT amount
– order amount including VAT.

The Company reserves the right to change its prices at any time and undertakes to charge the prices in force at the time of the Client’s order. Any change in the VAT rate will be passed on to the Product price including VAT. In the case of Products supplied to a Client outside the European Union, the price stated on the invoice will be calculated excluding VAT. Each Client is responsible for declaring and paying the VAT, customs duties, local taxes, import duties or other state tax payable in its own country. These duties and sums are not the responsibility of the Company. Orders placed via the Internet Site are payable by credit card. For Box Format orders, the invoice is sent to the Client with the Product. For Electronic Format orders, the confirmation mail serves as invoice.

Carriage charges and delivery times

The Products ordered in Box Format will be delivered to the address given by the Client during the order process, within twenty 20 days following the payment of the order. The delivery time given above is an average time depending on the destination, the method of delivery and the availability of the Product. The Company shall not be liable for the payment of any damages in the event of the above time being exceeded. The Company reserves the right to choose the carrier and guarantees the delivery of the Products. The Company will invoice the Client for the carriage charges.

Geographical zone of delivery

The Company delivers the Products in Box Format to all countries served by the international postal services. The Company delivers the Product in Electronic Format anywhere where the full downloading of the files is possible via the network.

Verification of the Products in Box Format

It is up to the Client to verify the state of the packaging of the Products supplied in Box Format and to make sure that they conform to the order placed. The Client must report any conspicuous defect or the non conformity of the Products supplied in Box Format within five (5) working days from the date of the Client’s receipt of the Products:
– either by e mail to: sales@cabri.com
– or by recorded delivery letter with acknowledgement of receipt requested sent to the following address: CABRILOG, 122 avenue du Vercors, 38600 Fontaine – FRANCE. The date of postmark shall be proof of dispatch date.

If no claim is made within the above mentioned time limit, the Products supplied in Box Format shall be deemed to conform to the order and to have been accepted by the Client. No Product shall be exchanged before having been returned to the Company and accepted by the latter, in good condition, in the same state as dispatched by the Company. In particular, the Product must not have been unsealed.

Cancellation time

In accordance with the law, the Client is allowed seven (7) clear days, as from the date of receipt of its order, in which to cancel its order. During that time, the Client may, at its own expense and without any penalties, return any Product or Products that it does not find suitable. The Client may then choose between either returning the Product or Products and being reimbursed for the amount paid, or exchanging the Product or Products ordered. It is understood that the Product or Products returned at the expense of the Client must be in good condition, in the state as supplied by the Company.

Due to their duplicable nature, the software must be returned sealed or in its original packaging. Failing that, no exchange or reimbursement shall be made, unless the Client has proved that the Product contains a defect as specified by the article “Legal guarantee and after sale service” of these General Terms. Product returns must necessarily be made to the postal address given in the article “Legal guarantee and after sale service”.

Legal guarantee and after sale service

In accordance with articles 1641 et sqq of the French Civil Code, the Client shall be covered by the statutory guarantee against concealed defects. Thus, in the event of a manufacturing defect in the Product making it unfit for the use for which it was intended, the Client may apply to the Company’s after sale service:
– either by sending an e mail to: sales@cabri.com
– or by sending a recorded delivery letter with acknowledgement of receipt requested to the Company at the following address: CABRILOG,122 avenue du Vercors, 38600 Fontaine – FRANCE.

The Client will then have the option of choosing between returning the Product and being reimbursed for the price, or keeping the Product and being reimbursed for part of the price. If the Client chooses to return the Product, the cost of the return will be paid by the Company on the basis of the original method of delivery. The Client acknowledges that the Company has duly fulfilled its obligation of information.

Transaction security

Payment for purchases on line shall be made by credit card via the site of the Société Générale by means of automatic forwarding from the Internet Site to the site of the Société Générale. In this way, no bank details concerning the Client transit via the Company. So as to optimise the security of the transactions on Internet, a Secure Socket Layer (SSL) on line payment system encrypts the Client’s credit card details.
NB: in the event of the Client using a browser that is not compatible with the SSL system, the transaction will not be possible.

Right of title

The Company retains full ownership of the Products sold until full and complete payment of the price, including charges and taxes. The mere presentation of an order to pay shall not constitute payment. The above provisions shall not debar the transfer to the Client of the risks of loss of or damage. Should the Client fail to pay the full price, including charges and taxes, the Company shall be entitled to demand the return of the goods delivered. Any expenses incurred in such returns shall be payable by the Client.

Software, guarantees and obligations

The software for which the user licence is sold on the Internet Site is guaranteed by its author, in accordance with the terms laid down in its documentation. The Company cannot give any guarantee whatever on the software and in particular on any defects or bugs. After complete payment of the price, and except for any contradicting clauses included in the licence attached to the Product, the Client shall be granted a non transferable personal user licence for the software for an unlimited time exclusive of any right of ownership. In accordance with the legal and statutory provisions in force, the Client shall refrain from copying the software other than as authorized by law and from performing any act liable to undermine the rights of the authors, their assignees or the Company.

The use of the Product is subject to the Client’s prior acceptance of the text of the user licence attached to the Product in paper format in the case of the Box Format and in the form of a computer file in the case of the Electronic Format.

By express agreement, the installation of the software on a computer shall constitute unconditional acceptance of the attached user licence.

Nominative information

In accordance with law no. 78 17 of 6 January 1978 relative to data processing and freedom, the information requested from the Client is necessary for the processing of the Client’s order and is solely for the use of the Company. The Client has right of access to the information concerning it. Upon request, this information can be communicated to the Client and, in the event of error or of modification, can be rectified. The Client can also prevent the communication of this information to any third party by making a request to the Company in writing.

Force majeure

The Company disclaims all responsibility for any failure to fulfil its contractual obligations in the event of a force majeure or chance event, including, but not limited to, disasters, fires, strikes within or outside the Company, failures or breakdowns within or outside the Company, and in general any event preventing the satisfactory execution of the orders.

Identification of the Company

CABRILOG, a French « société par actions simplifiée » with a capital of 84.480 euros
Registered office: allée du Château, Cumane, 38160 Saint Sauveur – FRANCE Registered with the Trade Register of Grenoble under the number 429 695 513
Offices: 122 avenue du Vercors, 38600 Fontaine – FRANCE.
Electronic address: info@cabri.com

Entire rights and obligations

The General Terms and related headings (order, security, payment, delivery, guarantee, after sale service) constitute the entire rights and obligations of the Company and of the Client concerning the orders of Products on the Internet Site. No general or special term communicated by the Client shall be integrated into the General Terms. If one of the clauses of the General Terms is declared to be illegal, invalid or unenforceable by a court for any reason whatsoever, this clause shall be deemed to be dissociated from the other clauses and shall in no way affect the validity or opposability of the other clauses.

Applicable law – Litigation

The General Terms shall be governed by French law. In the event of any dispute in connection with the interpretation or performance of any of the provisions of the General Terms and should the Company and the Client fail to come to an amicable agreement, the dispute shall be referred to the French courts.

COPYRIGHT © 2007 CABRILOG SAS

The components and structure of Site https://cabri.com are protected under design and model rights, copyright and trademark rights. Accordingly, it is strictly prohibited, except with prior written authorisation from CABRILOG SAS:

• to download or modify all or part of Site;
• to use Site or the contents thereof (referenced products, descriptions, prices, download or copy of data on behalf of another retailer, use of data, software, sound clips, graphics, images, texts, photographs, tools) for sale, commercial or non-commercial purposes or otherwise;
• to reproduce, copy, sell or utilise all or part of Site for commercial purposes;
• to utilise techniques enabling the copying of a trademark, logo or any other information (specifically images, texts, layouts);
• to use meta tags or any other “hidden” text containing Seller’s name, trademark or logo.

CABRI, CABRI GEOMETRE and CABRI GEOMETRY are trademarks of Texas Instruments and are used under license. CABRILOG is a registered trademark of CABRILOG SAS. The use of said marks by third parties without prior written authorisation from their respective owner is strictly prohibited. Product names, services and companies appearing on Site may be registered trademarks of third parties and are protected as such under intellectual property law.

Any rights that have not been expressly granted are reserved by CABRILOG SAS.